CRITICAL COOLING GUIDE

CRAC Refrigerant Transition Planning

A CRAC repair and a new CRAC installation can face different refrigerant requirements. Identify the installed refrigerant and the work being proposed before ordering equipment. Then check the rules and manufacturer-supported options that apply to that project.

Regulatory sources rechecked October 31, 2026; equipment references reviewed October 30. Confirm current project rules and equipment compatibility before proceeding.

Critical cooling NYC & Northern NJ
  1. Identify the systemRecord models, refrigerant, circuits and connected equipment.
  2. Define the proposed workDistinguish maintenance, repair, relocation and a new system.
  3. Verify the proposalCheck current rules, OEM compatibility and site requirements together.
Illustration: a refrigerant planning decision in three parts.

AT A GLANCE

Does the refrigerant transition force every CRAC to be replaced?

No universal replacement deadline applies to every existing CRAC. EPA’s Technology Transitions program distinguishes existing-equipment use and repair from restrictions affecting new products and systems. New York projects must also be checked against Part 494. Owners should identify the actual equipment, refrigerant and proposed work, then obtain current sector-specific and manufacturer guidance. A lower-GWP refrigerant is not a drop-in instruction for an existing system.

START WITH THE ASSET

Build a record that follows the full refrigerant circuit

Use documentation already held by the site; qualified personnel should resolve missing equipment information.

COMPARE THE ACTIVITY

A repair, replacement and move ask different questions

Have the proposal identify its regulatory and technical basis instead of using transition as a catch-all explanation.

Check the EPA date and New York requirements together

As of November 18, 2026, EPA lists a global warming potential (GWP) limit of 700 and January 1, 2027 for data-center, computer-room and IT-equipment cooling. For a self-contained product, the table applies to manufacture or import. For a new field-assembled system, the table applies to installation. An owner deciding whether to repair an operating unit is asking a third question.

New York’s Part 494 separately sets data-center restrictions using 20-year GWP (GWP20), including an earlier date than the federal 2027 entry. The federal date therefore does not establish that a New York project may proceed. DEC’s October 2026 FAQ says federal changes and extensions are not automatically adopted. Have a qualified professional confirm the equipment and end-use classification, proposed activity and any applicable exemption or DEC variance before ordering. This is not a universal deadline to replace existing CRAC equipment.

Put the project address, equipment classification, proposed work and expected manufacture or installation date at the top of the quote review. Ask the supplier to identify the applicable rule and any exception it relies on. For a Northern New Jersey installation, have the project team check New Jersey requirements for that address alongside the federal table. New York Part 494 applies in New York.

New refrigerant equipment is not a refrigerant swap

Manufacturer product information shows why model identity matters. Vertiv announced different low-GWP refrigerants for different cooling product families, including R-454B for a perimeter range and R-32 for row and wall products. Those are product examples, not instructions to put either refrigerant into a legacy CRAC. A manufacturer’s current replacement recommendation must address the actual installed combination.

Require written support for retained coils, piping, controls and other relevant components. Ask how the selected refrigerant’s safety classification and the equipment’s protective features affect the proposed installation. A claim that a refrigerant has a lower GWP does not answer those questions. Covered refrigerant work belongs with appropriately certified personnel and the additional competence required for the equipment and task.

Keep transition planning separate from leak and service obligations

A policy about new equipment does not replace the owner’s responsibilities for maintaining an existing installation. The site should retain refrigerant service records and ask which leak-repair, recordkeeping and other management requirements apply to its particular appliances. That assessment can depend on the refrigerant, charge, application and work; a general CRAC guide is not enough to classify every circuit.

Keep an immediate repair question and a capital-planning question in separate lines of the decision record. For example, a confirmed component defect may need a supported repair proposal while an owner separately evaluates long-term equipment support. Neither decision should rely on a sales statement that every older refrigerant is banned or a blanket assurance that existing equipment has no continuing obligations.

What a repair bid and a replacement bid should each document

On a repair bid, look for the failed component, refrigerant on the nameplate, parts the manufacturer supports and the components that will stay in service. On a new-system bid, look for matched indoor and outdoor model numbers where applicable, the proposed refrigerant, the dated regulatory basis and any work on piping, detection or controls. If one quote keeps the condenser and the other replaces it, resolve that scope difference before comparing prices.

For either bid, identify who provides cooling during the interruption, who confirms room conditions and who records acceptance. Keep the selected models, refrigerant and commissioning record with the asset file. Those details let the next technician identify the circuit without reconstructing a purchase order.

PLANNING THE WORK

Compare a supported repair with a complete replacement

A repair budget depends on the diagnosed fault and supported parts. A new-system budget also needs connections, controls, access, removal, applicable approvals and a defined handover. Request current refrigerant and equipment availability rather than assuming a shortage or price increase. Make allowances, exclusions and unresolved compatibility questions visible before approving a purchase.

IN YOUR BUILDING

Federal rules are one part of a NYC or NJ project

For a New York City project, check Part 494 alongside the applicable city requirements. For a Northern New Jersey project, confirm the applicable New Jersey and local requirements separately. Ask the responsible designer, installer and authority to confirm the project scope. A national manufacturer announcement does not establish site approval, permit status or every requirement for a particular building.

COMMON QUESTIONS

CRAC Refrigerant Transition Planning questions

Can we keep using an existing CRAC after January 1, 2027?

The Technology Transitions date is not a universal existing-equipment retirement deadline. EPA distinguishes continued use and repair from restrictions on new products and systems. The owner still needs to address the equipment’s condition and applicable service, leak-management and local requirements for the specific installation.

Can R-454B or R-32 be added to an R-410A CRAC?

Do not treat either as a drop-in refrigerant. The equipment must be designed and approved for its refrigerant and configuration. A different safety classification, components and operating requirements can matter. Obtain manufacturer-supported guidance for the exact system rather than mixing or substituting refrigerants.

Is a replacement condenser automatically treated as a new system?

Do not assume the answer from the component name alone. Define the complete proposed scope and ask for its treatment under the current applicable rules. Separately verify that the retained equipment and replacement component form a supported combination. Regulatory classification and technical compatibility are different checks.

Does an EPA technician certificate prove every required qualification?

No. EPA Section 608 certification addresses covered refrigerant work. It does not by itself establish manufacturer training, electrical qualifications, design responsibility, local licensing or authorization for the particular task. Ask the proposal to identify the people and responsibilities needed for the actual project.

What should we request when comparing repair and replacement?

Request the diagnosed fault, supported repair option, parts availability and condition findings alongside a complete new-system scope. Include interruption planning, retained components and outstanding approvals. Compare dated written evidence; do not make the decision from a generic deadline or an unsupported refrigerant-price forecast.

AIRPLEX MECHANICAL

Compare the transition options for your installed CRAC

Share the model, refrigerant record and proposed repair or replacement. Airplex can review the mechanical work; the project’s current regulatory and design requirements still need confirmation by the responsible specialists.

Call Now Request Service