Does a temperature spike prove cooling failure?
No. It is an observation to investigate. Sensor location, data quality, sampling, IT activity and cooling state can all affect the interpretation. Compare the spike with other relevant points and known events. Preserve uncertainty when the records cannot distinguish a real equipment problem from a measurement or timing issue.
How much history should we export?
Include enough time before and after the event to show the baseline, change and recovery, plus a useful comparison period where available. The right duration depends on the question and data retention. Save the original export before older records are overwritten; a screenshot alone may omit values and quality information.
Can a room thermostat substitute for rack-inlet data?
It provides a different observation. ENERGY STAR distinguishes control based on conditions at servers from return-air temperature. Label the sensor you actually have and limit conclusions accordingly. An existing room reading may reveal a broad event without describing the air entering every IT device.
Should we change settings to reproduce the problem?
Do not force a fault, stop cooling or alter live settings just to improve a graph. Begin with existing records and approved operating history. Any additional test belongs in an authorized plan with the relevant site teams, equipment safeguards and a defined method for returning to the accepted condition.
Will Airplex watch these logs continuously?
This guide describes how to use existing logs for an investigation. If the site needs recurring review, alert response or remote access, define those duties separately with named owners and agreed terms. Sending a trend export for a service discussion does not create an ongoing monitoring arrangement.