Start here
How is kitchen make-up air different from air conditioning?
Make-up air replaces air removed by exhaust. Air conditioning addresses temperature and moisture loads. Kitchen exhaust removes cooking heat and effluent at the hood. These functions interact, and some equipment combines more than one function, but a cooling unit's presence does not prove the kitchen's replacement-air arrangement is adequate.
Three connected functions, with different jobs
ASHRAE's kitchen-ventilation chapter describes cooling, replacement air and exhaust as coordinated parts of a commercial kitchen system. Replacement air can include dedicated make-up air and other designed air paths. Its temperature and distribution matter to the cooling and comfort assessment.
An exhaust fan removes air from the building. The replacement must come from somewhere. A dedicated make-up-air unit may temper or condition incoming outdoor air, depending on its actual configuration. An air conditioner may recirculate room air and may also have an outdoor-air arrangement. Identify those features from the installed system and records rather than from the equipment name alone.
References: [1]
Conceptual air-path diagram: kitchen and dining room
Read each arrow as an air path, except the cooling loop, which recirculates air within its served area. This is an explanatory sketch, not a proposed balance, airflow quantity or certified design. An actual restaurant may use a different arrangement.
| Path | Direction | Function and question |
|---|---|---|
| Dedicated make-up air | Outdoors → make-up-air unit → kitchen | Replaces exhausted air; what treatment and control are provided? |
| Designed transfer air, where provided | Dining-room supply → dining room → kitchen | Part of the intended replacement-air path; is it documented and measured? |
| Kitchen exhaust | Cooking area → hood → exhaust system → outdoors | Removes captured heat and effluent; which equipment and operating modes are covered? |
| Comfort cooling loop | Room air → cooling unit → served room | Conditions recirculated air; identify any separate outdoor-air connection. |
| Unplanned air entry | Door or building opening → interior | An observation to investigate, not a designed replacement-air allowance. |
References: [1]
Record what happens before deciding why
A difficult door, migrating odor or hot dining room is useful evidence when tied to time and operating conditions. None identifies a failed component on its own. Record the location, what equipment was operating and whether the condition was new or recurring.
Avoid collecting the kitchen temperature at one time and the dining-room temperature much later, then treating them as simultaneous. Note outdoor conditions, door use and which cooking appliances were active. If the operator cannot identify a fan or control, record that uncertainty rather than assigning it a function.
| Observed complaint | Useful record | Question for the assessment |
|---|---|---|
| Entry door becomes harder to open | Time, door, exhaust state and recent changes | How does building pressure behave in that operating mode? |
| Odor reaches the dining room | Location, cooking activity and timing | What are the actual airflow paths and hood-capture conditions? |
| Kitchen stays hot while dining room cools | Paired room readings and active equipment | Are the loads, air delivery and controls appropriate for each zone? |
| Comfort worsens at cooking start-up | Sequence of equipment starting and observed change | Are exhaust, replacement air and cooling operating as intended together? |
Example: a complaint that starts with the lunch service
Illustrative log: at 10:30 a.m., the dining room feels comfortable during preparation. At 11:15 a.m., more cooking equipment is operating, the hood system is running and staff report stronger air movement at the entrance. By noon, the dining room is warmer. No airflow or pressure measurements have been taken.
That log does not prove that the AC is too small or that the make-up-air unit has failed. It gives the assessment team a repeatable operating period to investigate. The next useful request is to verify equipment operation, control coordination and the relevant measured airflows and conditions during that period.
If a recent renovation moved a doorway, changed a hood or added an appliance, include the dated change and available drawings. A before-and-after sequence of observations can be more useful than an isolated complaint such as ‘the kitchen is always hot.’
Bring the right records to a coordinated review
Collect the hood and exhaust information, make-up-air and cooling equipment identifiers, available balancing reports, controls documentation and recent service findings. Ask the reviewer to identify which parts of the intended air balance are documented, which have been measured and which remain unknown.
Mechanical equipment, hood performance, fire-safety systems and building controls can involve different responsible specialists. Make those interfaces explicit in the scope. Do not block openings, change fan speeds or bypass interlocks to experiment with the symptoms. Any operating test should follow the site's authorized procedure.
The same record structure can help a school or institutional kitchen communicate an issue. It does not substitute a restaurant's assumptions for that facility's design and operating requirements.
Put this guide to work
Kitchen and dining-room operating-symptom log
Use the row labels as prompts for one operating period, then export a copy before recording another. Enter existing observations and records; do not alter equipment to fill the log.
Open each item to add your notes, then download the CSV to keep a copy. This tool does not save or submit your entries; do not rely on your browser restoring them.
Kitchen temperature or comfort
Dining-room temperature or comfort
Entry-door resistance or air movement
Odor migration and cooking activity
Hood / exhaust operating state
Make-up-air operating state, if known
Cooling controls and served area
Outdoor conditions and door activity
Continue with a related decision
Questions & answers
Will a larger air conditioner fix a hot commercial kitchen?
It may not address the actual issue. First define the cooling load and verify the exhaust, replacement-air and control arrangement under the conditions when the complaint occurs.
Does make-up air always arrive at a comfortable temperature?
No. The treatment depends on the unit and system design. Check the installed equipment and intended operating conditions; the term make-up air describes its replacement-air function.
Can we use an open door as the replacement-air plan?
Do not assume an open door supplies the intended quantity or path under changing conditions. Record observed door behavior and ask the responsible designer or assessment team to verify the actual replacement-air arrangement.
Sources & technical references
- ASHRAE Handbook: Kitchen Ventilation
Accessed November 16, 2026. Supports the linked cooling, replacement-air and exhaust functions and designed transfer-air concept. The air-path sketch, symptom log and scenario are original educational material; no hood-sizing or fire-system instructions are supplied.
NYC & Northern New Jersey
Describe when and where the conditions change
Bring the completed symptom log and available equipment information to Airplex Mechanical to define the relevant cooling, make-up-air and exhaust service scope.
Discuss the kitchen operating patternCall (347) 627-7146